STATE CERTIFICATION CONTINUOUS EDUCATION
FALL 2021
The San Joaquin & Calaveras Counties Electrical JATC invites you to attend the Continuous Education classes for State Certification to be held at the Stockton Electrical Training Center. All classes count toward the 32-hour Continuing Education requirements for Electrical Certification.
*SOME CLASSES REQUIRE A MINIMAL PAYMENT OR DEPOSIT THAT IS DUE PRIOR TO CLASS*
FACE COVERINGS ARE REQUIRED FOR ALL IN-PERSON CLASSES.
Please check website for any new dates/classes. www.595eastjatc.com
• FIRESTOP & POWDER ACTUATED TOOLS 2021 is a one evening three-hour class.
• WELDING 121 is a three-hour class for eleven evenings, eight of eleven classes are required for credit and only hours attended will be credited. Limited enrollment.
• LIFT EQUIPMENT SAFETY TRAINING This is a 6-hour Saturday class designed to instruct the safety aspects of lift equipment including forklift, scissor lift, boom-lift, Bucket truck, and extended reach lifts.
• CPR/FIRST AID – 4-hour class for one evening. Limited Enrollment. Required for Foreman Callout
• 2021 NFPA 70E – Class are 3 hours long, for two evenings. Based on 2018 NFPA 70E. All classes must be attended for credit. Limited Enrollment
• EXOTHERMIC WELDING is a one evening three-hour class.
• FDS – NECA Foreman Development – Classes are 3 hours long, with classes available each month, in person with masks and social distancing required. Required for Foreman Callout. Call NECA for Enrollment.
• HARASSMENT IN THE WORKPLACE 2021 is a three-hour class covering Harassment and Discrimination in the workplace.
• LOTO is a one evening three-hour class.
• CONFINED SPACE TRAINING 2021- 3-hour class, covering confined space entry.
• EVITP (Electric Vehicle Infrastructure Training Program) will meet for five evenings, three hours each, all classes must be attended for credit. Must pass final exam with 80%.
• ESAMTAC is an education/training program and credential that prepares electrical workers for the safe and effective assembly, testing, commissioning, maintenance, repair, retrofitting, and decommissioning of energy storage and microgrid (ESM) systems.
• OSHA 30 (ONLINE)- This OSHA 30-Hour Construction Training covers a broad spectrum of health and safety workplace topics that will familiarize you with OSHA Construction standards.
• ELECTRICAL SYSTEMS 11 (ONLINE)- Basic Electrical Review Course covering multiple electrical systems, electrical calculations, and NEC requirements. Must Pass with 70% to receive credit.
• ELECTRIC MOTOR DRIVE (ONLINE)- ADVANCED COURSE - This course is designed to teach electric motor and electric motor drive operation, installation, and troubleshooting principles. Must Pass with 70% to receive credit.
• DISTRIBUTED GENERATION (ONLINE)- ADVANCED COURSE - This course will introduce and guide the learner through various forms of alternative power sources that may be used for critical loads within a specific environment. Including information technology concepts, UPS systems, and fuel cells. Must Pass with 70% to receive credit.
STOCKTON JATC
CONTINUOUS EDUCATION
FALL 2021 CLASS SCHEDULE
(Contact Office to Register for classes 209-462-0751)
*SOME CLASSES REQUIRE A MINIMAL PAYMENT OR DEPOSIT THAT IS DUE PRIOR TO CLASS*
FIRESTOP & POWDER ACTUATED TOOLS
Days: Monday
Time: 5:00 PM - 8:00 PM
C.E. Hours: 3 hours
Dates: September 13, 2021
Class Size: 8 Minimum
Instructor: Hilti Rep.
Description: Hilti Firestop practical applications and Certification. Training and proper use of Hilti Powder Actuated tools.
Cost: N/A
WELDING 121
Days: Tuesday-Thursday
Time: 5:00 PM - 8:00 PM
C.E. Hours: 33 Hours
Dates: Sept. 14, 16, 21, 23, 28, 30, Oct. 5, 7, 12, 14, 2021
Class Size: 5 Minimum, 8 Maximum
Instructor: Rudy Elias
Description: This course will expose electricians to the proper techniques of using cutting torches, arc welding in applications used in the electrical industry.
Cost: _______________________________________________________________Materials $40.00
LIFT EQUIPMENT SAFETY TRAINING
Days: Saturday
Time: 8:00 AM – 2:00 PM
C.E. Hours: 6 Hours
Dates: September 18, 2021
Instructor: Trainer
Description: This class is designed to instruct the safety aspects of lift equipment for competent persons.
Cost: N/A
CPR/FIRST AID
Days: Wednesday
Time: 4:30 - 8:30 PM
C.E. Hours: 4 hours
Dates: September 22 or December 8, 2021
Class Size: 4 Minimum, 8 Maximum
Instructor: Cindy Kyle
Description: Certification in emergency response CPR and Basic First Aid.
THIS IS A FOREMAN CALL OUT REQUIREMENT.
Cost: _____________________________________________________________________ $25.00
NFPA 70E 2021
Days: Tuesday & Thursday
Time: 5:00 - 8:00 PM
C.E. Hours: 6 hours
Dates: September 21 & 23, 2021
Class Size: 6 Minimum, 8 Maximum
Instructor: Cindy Kyle
Description: Course focus is on NFPA 70E standard for electrical safety in the workplace. Topics include hazard assessment, energized work permits, PPE selection and limitations.
Cost: N/A
EXOTHERMIC WELDING
Days: Tuesday
Time: 5:00 PM - 8:00 PM
C.E. Hours: 3 Hours
Dates: September 28, 2021
Class Size: 8 Minimum
Instructor: Cadweld Rep.
Description: Erico Cadweld (nVent) exothermic welding certification class.
Cost: N/A
FDS (Foreman Development Series)
Days: Tuesday & Thursday
Time: 5:00 – 8:00 PM
C.E. Hours: 3 Hours per session
Dates: Sept. 30, Oct. 28, Nov. 23, Dec. 14, 2021
Thursday - September 30, 2021 – Role of Foreman
Thursday – October 28, 2021 – Project Start-up
Tuesday – November 23, 2021 – Material Management
Tuesday – December 14, 2021 – Man Loading
Thursday –Feb 1, 2022 – Managing Production
Tuesday – March 8, 2022- Estimating Principals
Thursday – March 10, 2022 – Project Closeout
Tuesday – April 26, Effective Foreman
Instructor: Various
Description: The Foreman’s Development Series, FDS, consists of individual modules where foreman and journeymen have the ability to participate in an interactive learning atmosphere of teaching and discussion focused on industry “best practices”. The rigorous and robust educational multi-lesson series is replacing EPS and is designed to educate, excite, and expand one’s knowledge. Earn continuing education hours towards state certification while strengthening skill sets and learning from highly trained subject matter experts. THIS IS A FOREMAN CALLOUT REQUIREMENT
FOREMAN AND JOURNEYMAN NEED TO CONTACT THE NECA OFFICE AT 925-828-6322 FOR ENROLLMENT AND COST. THE JATC ONLY FACILITATES THE CLASS.
Cost: _________________________________________________________________ CALL NECA
Harassment in the Workplace 2021
Days: Tuesday
Time: 5:00 – 8:00 PM
C.E. Hours: 3 Hours
Dates: October 5, 2021
Class Size: 6 Minimum - No Maximum
Instructor: Cindy Kyle
Description: Anti-Harassment Training.
Cost: N/A
Lock Out Tag Out (LOTO)
Days: Wednesday
Time: 5:00 – 8:00 PM
C.E. Hours: 3 Hours
Dates: October 6, 2021
Class Size: 6 Minimum - 12 Maximum
Instructor: TBD
Description: Lock Out, Tag Out training.
Cost: N/A
Confined Space Entry 2021
Days: Thursday
Time: 5:00 – 8:00 PM
C.E. Hours: 3 Hours
Dates: October 7, 2021
Class Size: 6 Minimum – 10 Maximum
Instructor: Cindy Kyle
Description: Confined Space training, will cover permit and non-permit entry, OSHA requirements, air sampling, ventilation, and retrieval equipment.
Cost: N/A
EVITP (Electric Vehicle Infrastructure Training Program)
Days: Tuesday & Thursday
Time: 5:00 – 8:00 PM
C.E. Hours: 15 Hours
Dates: Nov 2, 4, 9, 16, 18, 2021
Class Size: 8 Maximum
Instructor: Roy Sanchez
Description: Certification course for Electric Vehicle Infrastructure. Must attend all classes and Pass Final Exam with an 80%.
Cost: $100 Deposit
(ESAMTAC) Energy Storage & Microgrid Training & Certification
Days: Monday & Tuesday
Time: 5:00 – 8:00 PM
C.E. Hours: 33 Hours
Dates: Oct 25, 26, Nov 1, 2, 8, 9, 15, 16, 22, 23, 29, 2021
Class Size: 10 Minimum, 20 Maximum
Instructor: Mark Stoakes
Description: ESAMTAC is an education/training program and credential that prepares electrical workers for the safe and effective assembly, testing, commissioning, maintenance, repair, retrofitting, and decommissioning of energy storage and microgrid (ESM) systems. Must Pass Final Exam with 80% for certification.
Cost: $100 Deposit
ONLINE COURSES- You must call the office and pay for the course before you will be enrolled in the online courses.
OSHA 30 (ONLINE)
Days: Online
Time: Online
C.E. Hours: 30 Hours
Dates: September - December 2021
Instructor: Online
Description: This OSHA 30-Hour Construction Training covers a broad spectrum of health and safety workplace topics that will familiarize you with OSHA Construction standards. These topics will include the OSHA Construction Focus Four, identifying common worksite hazards, tool operation and more. Once you have successfully completed and passed the OSHA 30-Hour course, you will receive you a certificate of completion and official OSHA card in the mail. You will have 180 days to complete the course, upon completion of the course you will bring the certificate in to the office to receive credit. Must pass with 70% to receive credit.
Cost:_____________________________________________________________________ $100.00
ELECTRICAL SYSTEMS (ONLINE)
Days: Online
Time: Online
C.E. Hours: 8 Hours
Dates: September - December 2021
Instructor: Online
Description: Basic Electrical Review Course covering multiple electrical systems, electrical calculations, and NEC requirements. Must Pass with 70% to receive credit.
Cost: ____________________________________________________Electrical Systems Text $50.00
Deposit:___________________________________________________________________$100.00
ELECTRIC MOTOR DRIVE (ONLINE)
Days: Online
Time: Online
C.E. Hours: 15 Hours
Dates: September – December 2021
Instructor: Online
Description: ADVANCED COURSE. This course is designed to teach electric motor and electric motor drive operation, installation, and troubleshooting principles. The course begins with an introduction to electric motor drives, motor drive safety, and electric motor power requirements and control methods. After the introductory principles are covered, discussion moves to motor drive components, operation fundamentals, installation procedures, and motor drive programming. The course concludes with an in-depth discussion on motor drive start-up procedures, troubleshooting (including required test tools), motor drive selection, and motor drive retrofit procedures. Must pass with a 70% to receive credit.
Cost: __________________________________________________Electric Motor Drive Text $50.00
Deposit:___________________________________________________________________$100.00
DISTRIBUTED GENERATION (ONLINE)
Days: Online
Time: Online
C.E. Hours: 15 Hours
Dates: September - December 2021
Instructor: Online
Description: ADVANCED COURSE. The Distributed Generation course will introduce and guide the learner through various forms of alternative power sources that may be used for critical loads within a specific environment. The course starts by covering information technology sites and critical loads. After information technology concepts are understood, the learner will be introduced to uninterruptible power supplies, infrastructure components, critical UPS system design considerations, installation, and critical systems service. In addition to UPS systems, the learner will be introduced to fuel cell basics, fuel cell applications, and fuel cell installation. Must Pass with 70% to receive credit.
Cost: N/A
Deposit:___________________________________________________________________$100.00
Download:
 2021 Fall CE's.pdf
|
